Peugeot 3008 Key Fob Problems
The mid-sized SUV from Peugeot, the 3008, has a number of positive qualities. It's smooth to drive, looks great and has a large boot. But can it fend against strong competition in the most congested sector of the market?
If your Peugeot key fob isn't working, it could have been exposed to clean tap water or soapy water. You may need to remove the battery and clean it using electronic cleaner or isopropyl alcohol.
Dead coin battery
Peugeot key fobs are powered by the coin-sized battery. The power used to operate the remote locking system and other functions. The battery has a short lifespan and can wear out after years of use. An easy way to determine whether the battery is in good condition is to perform an electrical test. Multimeters are used to measure the voltage between the plus and minus poles of the battery. The results of this test will tell you whether the battery is dead or not.
The receiver module may be the cause of your key fobs not functioning after you've used your Peugeot 3008 for a prolonged period. The receiver module is responsible for receiving radio frequency signals from the key fobs and transmitting them to the car's systems. If the receiver module has issues, it will not be able send commands to the other modules in the car.
Sweat or moisture on the circuit board is another frequent reason for an inoperable key fob. This can cause short circuits that drain the battery, and also disable the remote locking feature of the key fob. If this is the case you need to bring your key fob to a chip level service technician to fix it.
Water damage
Water damage can be a concern when you drop your keyfob in the pool spa, washed it or left it in the rain. Water is a good conductor, and can cause a short circuit on circuit boards. It can also cause rusting of the metal traces and other components on the key fob. A wet circuit can also cause batteries to lose their charge.
If you have a spare key fob try using it to unlock or lock your Peugeot 3008 to eliminate the possibility that a dead battery is at the root of the issue. Interference signals can also cause your key fob to cease working properly. They interfere with the signal sent by the receiver module. These interference signals are caused by many sources that include radio transmitters in the area.
If you hear sloshing sounds emanating from your Peugeot 3008 when you drive, this is likely caused by a blocked condensate drain for the evaporator. You can test this by blowing compressed air through the drain holes beneath your door. You can also use flexible metal wire to move drain holes around to remove any dirt that has been accumulating. The sound of sloshing could also indicate that there are air pockets in the cooling system.
Faulty receiver module
The receiver module in a Peugeot 3008 key fob is responsible for transmitting the remote keyless system signal from the key fob to the car's receiver. If this module is damaged, it may hinder the car's ability to recognize the key fob. This issue can be caused by the battery being dead or water damage. Or, interference from electronic devices operating on the same frequency. In these cases the car could display a message saying "card not detected" on the display.
There are a variety of options to fix this issue. Try replacing the battery or reprogram the key fob. You may also be able to start the car with a spare. If the key fob doesn't work after these steps, it could be a chip faulty.
The best way to know if the key fob has a malfunctioning chip is to remove it and clean it up with a paper towel and rubbing alcohol. If the chip is fried then you should purchase another one. The FB Series enclosures come with an accessory for battery holders for coin cells that fits the most commonly used types of key fob batteries. These enclosures can be customized with digital printing and CNC-machined cutouts. If your key fob has been exposed to dirty or salty tap water, the chip could be contaminated and need to be cleaned.
Faulty keyless entry systems
When you see the message "card not detected" this means that your vehicle is unable to receive an alert from your key fob. This can be caused by various reasons, such as the battery being weak or dead. The issue can be solved by pressing the start button on the key fob. In some cases you may require taking the keyfob to an Peugeot dealer for repairs.
Checking the battery is the first step to diagnosing the problem with a Peugeot 3008 keyfob that won't lock or unlock doors. Batteries are the most frequent cause of a malfunctioning fob, but there are other factors that can cause this issue as well. These include worn buttons as well as water damage.
If you've recently been exposed to water and have your Peugeot key fob exposed to water that is clean it's a good idea remove the battery and dry the electronic components using paper towel. peugeot 207 key can also try isopropyl alcohol or a cleaner for this purpose. If the fob has been exposed to soapy or salty water, it's recommended to replace it.
If your key fob is still not working, try to reset it by disconnection of the 12 volt battery for about 15 minutes. Then reconnect the negative cable first, then followed by the positive cable.